Budapest University of Technology and Economics, Faculty of Electrical Engineering and Informatics

    címtáras azonosítással

    vissza a tantárgylistához   nyomtatható verzió    

    Power Systems Laboratory 2

    A tantárgy neve magyarul / Name of the subject in Hungarian: Villamosenergia-rendszerek laboratórium 2

    Last updated: 2017. november 7.

    Budapest University of Technology and Economics
    Faculty of Electrical Engineering and Informatics
    Course ID Semester Assessment Credit Tantárgyfélév
    VIVEMB00 3 0/0/3/f 4  
    3. Course coordinator and department Dr. Kiss Péter,
    4. Instructors



    Tanszék, Int.:

    Dr. Kiss Péter

    egyetemi docens

    Villamos Energetika Tanszék

    6. Pre-requisites
    (TárgyEredmény( "BMEVIVEMA04" , "jegy" , _ ) >= 2
    TárgyEredmény( "BMEVIVEMA05" , "jegy" , _ ) >= 2)

    ÉS NEM ( TárgyEredmény( "BMEVIVEM318" , "jegy" , _ ) >= 2
    TárgyEredmény("BMEVIVEM318", "FELVETEL", AktualisFelev()) > 0
    TárgyEredmény( "BMEVIVEMB03", "jegy" , _ ) >= 2
    TárgyEredmény("BMEVIVEMB03", "FELVETEL", AktualisFelev()) > 0)

    A fenti forma a Neptun sajátja, ezen technikai okokból nem változtattunk.

    A kötelező előtanulmányi rend az adott szak honlapján és képzési programjában található.



    Getting the credits of Protection Systems and Measurement Technology (BMEVIVEMA04)

    Getting the credits of Electric Energy Market (BMEVIVEMA05)

    7. Objectives, learning outcomes and obtained knowledge

    The goal of the laboratory is providing additional practical laboratory measurements and simulations to the subjects of the specialization. 

    8. Synopsis

    1. Overcurrent Protection – Setting of ETIVA and DTIVA Protection Relays, Short Circuit Composition on a Physical Model, Operation by Different Conditions

    2. Distance Protection – Setting of ETV and DTVA Protection Relays, Short Circuit Composition on a Physical Model, Operation by Different Conditions.

    3. Digital Overcurrent Protection, Digital Distance Protection – Setting of Protection Relays, Testing with Generator, Characteristic Check-up.

    4. Analysing of Differential Relays of Transformers – Short Circuit Composition on a Physical Model, Operation by Different Conditions

    5. Digital Motor Protection – Setting of Protection Relay, Testing with Generator, Check-up.

    6. Switchboard Centre’s Training Simulator – The Simulation of the Operation of Different Protection Relays, Results and Conclusions on a Training Simulator Software.

    7. Simulation of Electric Energy Market: Defining of Trade Exchanges, Submission, Clearing, Pricing, Offering.

    8. Analysing of Secondary Current and Voltage Transformers – The Errors of a ETV 5A Current Transformer in Function of the Applied Burden at Nominal and Ten Times Higher Current; Measuring the Change of the Excitation Impedance in Function of the Voltage and Frequency on an ETV 100 V Voltage Transformer; Defining the Usability of the Measured Instrument Transformers.

    9. Live Line Maintenance.

    10. Wind Turbine Generators and its Regulation

    9. Method of instruction

    Laboratory measurements, Computer simulation tutorials in computer laboratory.

    10. Assessment

    During the study period:

    ·         All measurements are compulsory for all students.

    ·         Preparation for the laboratory measurements from the available preparation material (if any).

    ·         Participation on the measurement according to the provided schedule. Only those can attend who has passed the entry test, what can be conducted as a written quiz.

    ·         A measurement record should be taken and submitted within seven calendar days. The measurement record could be individual or teamwork, depending on the exact occasion (one record should be taken at each independent workstation).


    The students get a mark after each measurements (representing the preliminary preparation the activity during the measurement and the measurement record). At the end of the semester, signatures can be given only if all measurement records are acceptable by the laboratory instructors.


    The students are taking part an exam measurement, which is organised on week 14 of the semester. Every student must repeat one part of a specific measurement from the semester and prepare a draft measurement record, without any external help. The exam measurement would take 60 minutes in time, allocated to the last week’s slot of the measurement, the schedule and allocation would be provided by the laboratory coordinator on the spot.


    The final mark of the subject would be composed from the averages of the entry quizzes (30%), the averages of the measurement records (20%) and the mark of the exam measurement (50%).



    During the exam period: nothing.

    11. Recaps

    Late submission of the measurement record can be approved by the end of the supplementary week, if supplementary fee has been paid.



    The missed measurements (due to missing or failing of entry test) can be substituted during the semester or the supplementary week according to the following rules:

    ·         Two measurements can be substituted after scheduling it with the laboratory instructor.

    ·         If there is still a scheduled measuring group during the rest of the semester which has not taken the specified measurement, and the number of participated students allows to join, the measurement can be substituted only in that occasion.

    ·         If – after discussing with the lab instructor – it is not an option, the measurement can be substituted at the end of the semester, during the supplementary week.

    ·         In case of the missed measurements are substituted later, then the exam measurement is scheduled, the affected measurement cannot be allocated to the student on the exam measurement.



    It is not possible to have any extra measurement for correcting lower sub-marks.

    12. Consultations

    In case of it is necessary, after contacting with the laboratory instructor.

    13. References, textbooks and resources

    The materials for the preparation are available on the subject’s site at the departmental homepage.

    14. Required learning hours and assignment

    Laboratory session


    Preparation for the measurements


    Preparing the measurement record


    Preparation for the exam measurement




    15. Syllabus prepared by



    Tanszék, Int.:

    Dr. Kiss Péter

    egyetemi docens

    Villamos Energetika Tanszék

    Dr. Raisz Dávid

    egyetemi docens

    Villamos Energetika Tanszék