Budapest University of Technology and Economics, Faculty of Electrical Engineering and Informatics

    Belépés
    címtáras azonosítással

    vissza a tantárgylistához   nyomtatható verzió    

    Microelectronics Laboratory

    A tantárgy neve magyarul / Name of the subject in Hungarian: Mikroelektronikai laboratórium

    Last updated: 2015. február 6.

    Budapest University of Technology and Economics
    Faculty of Electrical Engineering and Informatics

    Branch of Electrical Engineering
    BSc
    Microelectronics design and manufacture specialization

    Course ID Semester Assessment Credit Tantárgyfélév
    VIEEAC03 6 0/0/3/f 4  
    3. Course coordinator and department Dr. Horváth Péter,
    4. Instructors

    Name:

    Affiliation:

    Department, institute:

    Dr. Peter Gaertner

    Hon. associate professor

    Department of Electron Devices

    Dr. György Bognár

    Associate professor

    Department of Electron Devices

    Dr. László Juhász

    Assistant professor

    Department of Electron Devices

    5. Required knowledge

    Microelectronics, Electronics 1, Digital technic 1-2

    6. Pre-requisites
    Kötelező:
    (Szakirany("AVINmikroterv", _) VAGY
    Szakirany("AVImikro", _)
    VAGY Training.code=("5NAA7") )

    ÉS (TárgyEredmény( "BMEVIEEAC01" , "jegy" , _ ) >= 2
    VAGY TárgyEredmény( "BMEVIEEA328" , "jegy" , _ ) >= 2 )

    ÉS (TárgyEredmény( "BMEVIEEAC02" , "jegy" , _ ) >= 2
    VAGY TárgyEredmény( "BMEVIEEA329" , "jegy" , _ ) >= 2 )

    ÉS NEM ( TárgyEredmény( "BMEVIEEA330" , "jegy" , _ ) >= 2
    VAGY
    TárgyEredmény("BMEVIEEA330", "FELVETEL", AktualisFelev()) > 0 )

    A fenti forma a Neptun sajátja, ezen technikai okokból nem változtattunk.

    A kötelező előtanulmányi rendek grafikus formában itt láthatók.

    Ajánlott:

    Recommended:

    Signature in Electronics 1.

    Obtained credits in Microelectronics
    7. Objectives, learning outcomes and obtained knowledge

    Students can choose from two practical tasks at the beginning of the semester.

    1.      Design of a digital integrated circuit

    2.      Semiconductor technology process

    In the digital circuit design task, a moderately complex ASIC has to be designed from specification to full layout using a Verilog behavioural description. The circuit can be implemented on an FPGA for verification.

    In case of the semiconductor process, the production steps of a simple monolite integrated circuit should be followed from qualifying the semiconductor material to packaging, including doping, oxide growth, photolithography and calibration.

    8. Synopsis

    Digital design branch

    1.      Getting familiar with the hardware environment and operating system.

    2.      Getting familiar with open IC design systems. Getting to know a standard IC design system (Mentor/Cadence) through an example.

    3.      Design of digital circuits with top-down methodology.

    4.      Getting familiar with synthesis tools.

    5.      Input of the behaviour of the system using hardware description language.

    6.      Validation of operation with logic simulation.

    7.      Synthesis, technology-dependent optimization, runtime analysis.

    8.      Automatic ASIC layout generation.

    9.      Implementation in FPGA, verification.

    Semiconductor technology branch

    1.      Creation of integrated circuits.

    2.      SI wafer preparation.

    3.      Thermal oxidation.

    4.      Photolithography.

    5.      Doping with diffusion.

    6.      Metal layer deposition.

    7.      Thermal treatment.

    8.      Packaging.

    9.      Calibration, characterization.

    10.  Industrial lookout.

     

    9. Method of instruction

    Computer or technology laboratory practice. Design practice is done in computer laboratory in pairs. Technology laboratory takes place in the clean room of the department where groups of 4-6 people go through the technology steps on one wafer. Validation, qualification and calibration of the complete circuit is also the task of the groups. Timetable is arranged in the beginning of the semester.

    10. Assessment

    The course ends with a mid-term mark. The mid-term mark is based on the work during the semester and the assignments handed in. In the technology laboratory, the condition of the mid-term mark is to finish all process steps and hand in a report.

    11. Recaps

    There is one repeat possibility in the supplementary period.

    12. Consultations

    By appointment with the instructors.

    13. References, textbooks and resources

    Literature accessible on the web page of the department, hand-outs during the laboratories.

    14. Required learning hours and assignment
    Kontakt óra42
    Félévközi készülés órákra21
    Felkészülés zárthelyire0
    Házi feladat elkészítése36
    Kijelölt írásos tananyag elsajátítása21
    Vizsgafelkészülés0
    Összesen120
    15. Syllabus prepared by

    Name:

    Affiliation:

    Department, institute:

     

    Dr. György Bognár

    Associate professor

    Department of Electron Devices

    Dr. Peter Gaertner

    Hon. associate professor

    Department of Electron Devices

    Dr. András Timár

    Assistant professor

    Department of Electron Devices

    Gyula Horváth

    Assistant professor

    Department of Electron Devices