vissza a tantárgylistához   nyomtatható verzió    

    Electronics 2.

    A tantárgy neve magyarul / Name of the subject in Hungarian: Elektronika 2.

    Last updated: 2012. november 23.

    Budapest University of Technology and Economics
    Faculty of Electrical Engineering and Informatics
    Budapesti Műszaki és Gazdaságtudományi EgyetemVillamosmérnöki és Informatikai KarVillamosmérnöki Szak  
    Course ID Semester Assessment Credit Tantárgyfélév
    VIAUA300   3/2/0/v 5  
    3. Course coordinator and department Dr. Varjasi István,
    Web page of the course http://www.aut.bme.hu/portal/BMEVIAUA300
    4. Instructors
    Név:Beosztás:Tanszék, Int.:
    Dr. Kárpáti AttilaEgyetemi docensAut. és Alk. Inf. Tanszék
    Dr. Varjasi IstvánEgyetemi docensAut. és Alk. Inf. Tanszék
    5. Required knowledge

    6. Pre-requisites
    Kötelező:
    (TárgyEredmény( "BMEVIHIA205" , "aláírás" , _ ) = -1
    VAGY
    TárgyEredmény( "BMEVIHI3020" , "aláírás" , _ ) = -1
    VAGY
    TárgyEredmény( ahol a TárgyKód = "BMEVIDHKV05", ahol a Típus = "JEGY", ahol a Ciklus = tetszőleges, ahol a KépzésKód = tetszőleges) >= 2
    VAGY
    KépzésLétezik( ahol a KépzésKód = "5N-07")
    VAGY
    Szakirány( ahol a SzakirányKód = "KIEGVBSC", ahol a Ciklus = "2007/08/1") )


    ÉS NEM ( TárgyEredmény( "BMEVIAUAC05" , "jegy" , _ ) >= 2
    VAGY
    TárgyEredmény("BMEVIAUAC05", "FELVETEL", AktualisFelev()) > 0)

    ÉS Training.Code=("5N-A7")

    A fenti forma a Neptun sajátja, ezen technikai okokból nem változtattunk.

    A kötelező előtanulmányi rend az adott szak honlapján és képzési programjában található.

    7. Objectives, learning outcomes and obtained knowledge The course lays down the basics to understand the system level functions of more complex electronic systems including the underlining circuitry. It also presents the related calculation rules and design principles.

     

    Obtained skills and expertise:

     

    The skills in electronics obtained in the framework of this course (together with the course entitled Electronics 1) empower students with the necessary expertise to understand the courses of the study specialization blocks.

     

     

    8. Synopsis Noise in electronic devices, noise bandwidth, power density spectrum, probability density function of the noise signal. Thermal noise, flicker noise, etc. Equivalent noise circuits of the electronic devices, equivalent input and output noise of the amplifiers. Noise figure. The phase-locked loops and their applications. Structure, linear small signal baseband model, different types of the PLL-s. Analysis of the linear baseband model. FM modulator and demodulator. Clock signal generators, jitter. Selective electronic circuits. Specification, approximation, tolerance scheme, transformations. Active RC circuits, switched capacitor selective circuits, resonant filters (LRC circuits, ceramic filters, etc.). Nonlinear circuit: rectifiers, limiters, piecewise linear circuits. Logarithmic and exponential amplifiers. Circuits of mixers and frequency transpose. Modulators and demodulators. Basic knowledge of energy conversion techniques. Power rectifiers, DC regulators: analog and switch-mode circuits. DC- DC and DC-AC converters. Overcurrent protection. Thyristors and their applications, new power electronic semiconductor devices and modules. Tree phase rectifiers, power converters. Power efficiency of the electronic circuits. Problems of the implementation. Description of passive distributed circuits in the time and frequency domain. Modeling and design of active analog circuits with distributed reactive elements (very high frequency amplifiers, oscillators, mixers, etc.). Microelectronic implementation of distributed circuits. High frequency integrated circuits (oscillators, power attenuators, etc.). Thermal problems of the electronic circuits, methods of heat removal. Conduction, convection, radiation. Thermal resistance and capacitance. Cooling methods, heat pipe. Thermal design of electronic devices with CFD. Heat sink of mobile equipment.

     

    9. Method of instruction

    10. Assessment

    11. Recaps

    12. Consultations

    13. References, textbooks and resources

    Tony R. Kuphaldt:  All about circuits, http://www.allaboutcircuits.com/

    14. Required learning hours and assignment
    Kontakt óra70
    Félévközi készülés órákra20
    Felkészülés zárthelyire20
    Házi feladat elkészítése
    Kijelölt írásos tananyag elsajátítása
    Vizsgafelkészülés40
    Összesen150
    15. Syllabus prepared by

    Név:

    Beosztás:

    Tanszék, Int.:

    Dr.Hermann Imre

    Egyetemi adjunktus

    Aut. és Alk. Inf. Tanszék

    Dr. Kárpáti Attila

    Egyetemi docens

    Aut. és Alk. Inf. Tanszék

    Dr. Varjasi István

    Egyetemi docens

    Aut. és Alk. Inf. Tanszék